Comments
-
Dear TKWITS, thanks for your reply, but I have fond the problem. It's On Dynamic Object!!! I have disabled and now all it's work Correctly. Pietro
-
Che Palle https://status.sonicwall.com/ it's up but I confirm it's now it's work
-
I will be able to answer this question on Monday. Good weekend Pietro
-
Thanks Michael for your support. Pietro
-
Yes it's no CPU spikes The 3 WAN it's connected directly to firewall at port X1,x3,x3 without switches, or HA system If you see on screen shoot I have 2 different probe one it's 1.1.1.1 (not used in the firewall) and other it's FQDN (mix-it.net). I have tried to change ip 1.1.1.1 with 8.8.8.8 same result. Pietro
-
The firewall works correctly. I have make a screenshot on spike the core it's normal.
-
Dear Michael thanks for your reply, The core and CPU it's normal, I have tried to change MTU value on interfaces but the problem it's the same.
-
Dear Jdakes, you have active TCP Stream in GAV settings? If yes you can test without this settings. The second question is to see if value change with 2048 on DPI-based service enabled (KBytes)" . I have similar problem but with 1gb FD.
-
Dear Markd thanks for your replay, I confirm that is possible https://www.sonicwall.com/support/knowledge-base/perform-restart-of-firewall-from-nsm/211228025028670/ . But I'm try to scheduled for firewall that not have NSM console. This my request you can suggest for RFE. Pietro
-
Thanks so much I waiting this feature from long time Pietro